2017 Tartan 115

With her BPA epoxy resin infused, eglass, and synthetic core hull laminate, BPA epoxy resin infusion deck, and a carbon-fiber mast and rudder as standard equipment, the 115 maintains high octane performance ratios yet an interior that features two separate cabins, luxurious main cabin, sit-down nav station, large galley, and head with stall shower.

The 115's long waterline (33 feet) produces a very impressive 147 displacement/length ratio. Her BPA epoxy hull laminate consists of an all uni-directional e-glass structural laminate locally reinforced with uni-directional carbon fiber and sandwiched on sythetic foam coring. The laminate is carefully placed in the mold dry, and vacuum bagged and the resin is then infused into the matrix. Building the laminate this way produces the lightest, strongest, and stiffest structure possible and the weight saved can be used for interior appointments and additional ballast further enhancing the 115's performance and livability. The bulbed 4,200-lb lead keel has an extremely low center of gravity producing a high righting moment allowing a powerful sailplan resulting in a sail area/displacement ratio of 23.1.

The infusion deck's laminate is structured from unidirectional e-glass, select end grain balsa coring, and BPA epoxy resin. Using resin infusion with these materials results in a lighter, stiffer, and stronger deck than those produced with the antiquated, low-tech polyester resin laminating techniques favored by most other builders.

The mast on the 115 has been co-engineered by SP Systems, the world leader in composite engineering and materials technology, to produce an optimal section for the boat. Built by Novis Composites utilizing pre-preg, carbon-fiber laminates, cured under pressure (100 psi) at 250 degrees F, the 115's mast is less than half the weight of a comparable aluminum mast yet is stiffer and stronger. The weight saved aloft adds to the 115's stability advantage and reduces pitching moment maximizing her performance. A carbon-fiber mast, once an expensive option or custom raceboat feature, is standard equipment on the 115, further testament to dedication to advanced yacht construction.

The boat's fractional rig features a 108% One-Design genoa, sheeted to Harken adjustable housetop tracks set at 8.5 degrees for tight upwind sheeting angles. Offwind performance is optimized with a One-Design 15' 11" spinnaker pole allowing for an oversized symmetrical spinnaker. For daysailing or cruising, there are plenty of options for sailing with an asymmetrical spinnaker whether in a snuffer or not.

Distinctive deck design is continued on the 115. Wide side decks with molded-in non-skid provide safe and secure maneuvering in a seaway. The signature “slash” style portlights and classic styling makes the 115 a head-turner in any harbor. The cockpit puts comfort and function first. The helmsman is pampered with a wrap-around helmseat with the 60" wheelwithin fingertip reach for upwind sailing. The main trimmer is given a convenient position just forward of the helmsman and has the mechanical advantage necessary in the Harken gross/fine tune mainsheet system to tweak the best performance possible. The cockpit seats are over 6 feet long and have high seat backs for comfort. The custom toerail and stanchion design maximizes on deck space and offers a necessary toehold when moving forward in challenging conditions. With the racer/cruiser in mind the deck for the 115 is designed for maximum performance while offering comfort for after the race or when cruising.

The 115 interior belies her raceboat capabilities. Using lightweight composite laminates, cabinetry is abundant and attractively finished in varnished cherry with laminated, curved trim. Bulkheads are attached to the interior components using Plexus methylmethacrylate adhesives providing additional stiffness to the hull structure without adding weight. Accommodations for six are provided in fore and aft double cabins and bunk-length main cabin settees. The forward facing nav station is designed to accommodate full navigational instrumentation. The galley is fit with a two burner gimbaled LPG stove/oven, large icebox, deep sink, and ample storage for provisions. A stall shower and large head are located aft and to port. By concentrating on weightsaving construction technologies the 115 delivers an interior befitting a comfy cruiser without giving up her dedication to top racecourse performance.

Basic Boat Info

Make: Tartan
Model: 115
Year: 2017
Condition: New
Category: Sail
Construction: Fiberglass

Dimensions

Length: 37'9 ft
Waterline Length: 33 ft
Beam: 11'11 ft
Max Draft: 6'8 ft
Displacement: 10,800 lb
Bridge Clearance: 59'9 ft
Cabin Headroom: 6'4 ft
Dry Weight: 11800 lb
Ballast: 3500 lb
Single Berths: 6

Tanks

Fuel Tank Capacity: 24 gal
Water Tank Capacity: 70 gal

Other

Heads Count: 1
Boat Class: Racers, Racers and Cruisers, Cruisers
More Info :

Contact Us


More From Tartan


2024 Tartan 5300
2024 Tartan 395
2024 Tartan 365
2024 Tartan 455
2024 Tartan Caraluna 245