2025 Island Packet 439

Construction

One-piece integral hull and keel of 100% hand laminated high modulus knitted fiberglass infused with a proprietary pressure-fed application system. Light ivory gelcoat with urethane painted boot stripe.
Fully encapsulated lead ballast forms double bottom over length of keel. No keel bolts to maintain, loosen or leak.
Skeg hung, protected rudder
Coosa Composite in lieu of marine plywood
Molded structural interior grid unit bonded with hull and interior bulkhead system to form unified structure.
Tri-axial woven roving fiberglass cloth
High-quality, vinyl ester resins
Chainplates, made of 316L annealed stainless, interlocked and bonded directly with hull structure for secure “belt-and-suspenders” installation.
Best Hydrashield color retention hull and deck gel system includes a ten-year pro-rated limited warranty against osmotic blisters.
Deck laminate features Divinycel, virtually eliminating the potential for deck deterioration associated with other core materials. Includes a 10-year pro-rated limited warranty against deck core-degradation or delamination, an industry exclusive.
Two-tone deck surfaces: light ivory with tan premium diamond pattern slip-resistant surfaces
One-piece deck attached to integral hull flange with bolts, lock nuts and urethane adhesive sealant. Hardware backed with aluminum plates where required.
Molded fiberglass headliner with a textured finish

Rig and Sails

Solent or cutter; stack pack or furling main
Harken® headsail roller furling systems
Hoyt Boom® equipped self-vanging jib or staysail for ease of handling, improved performance and superb adaptability to a wide range of wind and sea conditions.
Single line main and jib sheeting from primary winches
Anondized aluminum mast and booms; wire rigging

Cockpit and Deck

Ivory gel coat with camel tan molded non-skid for low glare (other colors optional)
Large SS bow rail w/ LED navigation light
1 1/8" stanchions with double 316 SS non-coated lifelines
(2) SS Mantus anchor rollers
Painted Hoyt boom
SS bow cleats and chocks
Pre-wired for anchor windlass
(13) SS opening ports with screens (self-draining with friction hinges)
(8) overhead aluminum frame hatches with shades and screens (SS frame optional)
Full-length SS handrails along cabin top
(3) SS dorade vents with line guards
Rigid boom vang
Harken deck hardware and traveler
Harken size 44, 2-speed cabin top winches (2)
Harken size 54, 2-speed primary winches (2)
Harken size 16, 1-speed furling line winches (2)
Spinlock halyard and sheet stoppers
Large cockpit with line storage and lazarette access
Emergency tiller stored in lazarette
Integrated sea hood with teak trim and teak hatch boards
Ivory starboard cockpit table w/ fold-out leaves (optional teak)
Large pedestal w/ guard and IP inlay on the compass
12v and USB outlet on pedestal
Edson 32" SS wheel
Wrap around stern rails with integrated seats
LED cockpit, transom and stanchion gate safety lighting (dimmable)
Large sugar scoop style transom with port and starboard transom entrances
Integrated transom boarding steps w/ handholds on steps for boarding from the water
Transom boarding ladder (pocket style)
(6) Hull side non-opening ports
Hot and cold shower at transom
Sliding companionway hatch with seahood, interior latch and exterior hasp and lock
Integrally molded dodger mount on cabin top
"Island Packet" step plates on side boarding gates
Black composite eyebrow (teak optional)
Flag pole and holder

Interior

Solid tongue and groove varnished Sapele and light maple soles
Locking sole drop boards
All drawers dove-tail constructed
I pad loaded with owner's manuals
All overhead and under gunnel LED lighting on dimmers
Main salon standard configuration has a starboard settee w/ large storage areas behind and beneath, as well as a lockable drawer for ship's papers, etc. Starboard settee converts to double bunk. Large drop-leaf table folds against the bulkhead for an open salon with dedicated wine and glass storage cabinet behind.
Portside standard is two captain's chairs with a folding table in between. There are many different custom options available to suit your needs such as full settee, navigation station, and/or additional storage units.
Aft stateroom to port with pillow top, tall coil, 7 1/2" innerspring queen-sized mattress, privacy door to salon and ensuite head with stall shower. Cedar-lined hanging locker with automatic light when opened.
On the starboard side, aft of the galley is a third cabin that can be finished as a third berth sleeping area, a walk-in workshop/storage area or a pantry/storage extended pantry.
Large galley featuring a deluxe three-burner Force 10® LPG stove (with oven and broiler, stainless steel sealed burner top, guard rail with harness hooks, lift-off cover, storage under), Vitrofrigo refrigerator/freezer (drawer units), dish rack and utensil drawers, under counter storage for dry goods, seamless Corian or under-mount SS galley sink with a Corian sink filler insert (stows in cabinet), trash bin under sink, microwave, solid acrylic countertops with integral fiddles, molded slip-resistant sole.
Forward owner’s stateroom with offset island berth, pillow top, tall coil, 7 1/2" innerspring queen-sized mattress with storage underneath, settee, privacy door to salon and ensuite head with stall shower. His and hers cedar-lined hanging lockers with automatic light when door is opened.
Head compartments with separate stall, stand up showers w/ sitting bench and bi-fold doors as well as solid acrylic counters with integral fiddles and vanity cabinet storage with large mirror above the sink. They also feature electric flush heads w/ tank monitor, molded slip-resistant soles and choice of a vessel or under mount sink.
SeaGull® IV water filter for freshwater (cold) at dedicated faucet at galley sink.
Numerous SS opening ports with safety glass and screens throughout; numerous overhead hatches with retractable screens/shades.
Premium Sapele hardwoods, veneers and coordinated surfaces for bulkheads, cabinetry, and trim. Louvered raised panel cabin doors; louvered locker doors, extensive radius corner detailing, cedar-lined lockers and drawers.
Furniture quality satin gloss varnish applied to all interior wood surfaces in a multi-coat process.
Hinged solid Sapele companionway ladder with slip-resistant treads, easy engine access with pneumatic pistons for raising and holding up.
Sapele grate at the base of companionway lifts to reveal removable dust pan, bilge access.
Overhead salon handrails and numerous bulkhead mounted SS handrails throughout for safety and security.
Storage rack for companionway boards
Soft and hard good color options
Pre-wired for fans
Numerous overhead LED touch lights

Mechanical / Engineering / Plumbing

80HP Yanmar® 4JH80 turbo diesel engine, fresh water cooled, rubber isolation mounts on reinforced fiberglass bed with integral oil pan, mechanical fuel pump, 110 amp Balmar® alternator and digital DuoCharge controller. A 3-bladed fixed prop (feathering prop optional), Yanmar® fuel filter with water separator mounted for easy access. Jacketed fuel lines with swedged and threaded fittings, intake strainer.
Yanmar® C Engine Panel with temperature and oil pressure gauges.
Engine access from hinged front stairs and rear panels, hinged side opening doors. Pre-plumbed for electric oil change system.
Extensive sound-control with premium lead-lined insulation, gasketed access doors and panels.
Five (4) house Lifeline 31 XT AGM batteries, 125 ah each
One (1) dedicated start battery, Lifeline 27 AGM, 100ah
Inverter 5000 peak/100 amp charger
30 amp AC dockside power system with ELCI ground fault inlet protection breaker and one (1) 50-foot shore power cord. Numerous outlets, GFCI protected.
Engine instrument panel with tachometer, hour meter and engine monitoring system.
Electrical DC grounding/bonding system for rig and all underwater metals.
Pressure water system with hot and cold service to galley, head and cockpit shower. UL® listed eleven (11) gallon water heater with engine heat exchanger, insulated hot water hoses throughout. Dedicated head, sink/shower drain sump with strainer.
LPG system with 10-pound aluminum tank in self-draining storage compartment with gasketed, lockable lid, remote solenoid, dual safety shutoffs and gauge; room for extra tank.
Fuel, water and holding tanks below cabin sole maximize storage and stability and minimize trim changes with varying tank fluid levels.
Fuel tank (160 gallons) constructed of welded, baffled heavy gauge marine-grade aluminum (5052-H32) with shut off valve, s/s deck fill, tank mounted mechanical gauge. Pre-plumbed with second pickup/return for addition of generator and/or heater system.
ThermoCure™ freshwater tank (260 gallons) constructed of infusion molded fiberglass using FDA approved vinyl ester resins, baffles, s/s deck fill, electronic remote tank level gauge.
Infusion molded fiberglass holding tank (55 gallons) with baffles, s/s deck pump-out fitting, electronic remote tank level gauge.
Heavy-duty electric bilge pump with auto control and premium electronic pump switch. BilgeAlert® high water bilge alarm with remote alarm panel at helm.
UL listed bronze, thru-bolted, flanged seacocks on all thru-hulls below the waterline; ball valves on thru-hulls in boot stripe.
Masthead anchor light, foredeck/steaming light on the mast, nav lights, all LED.
Pre-wired for anchor windlass installation, bow thruster cables, fan and speaker wires throughout interior, VHF cable in mast and from mast step to nav area; messengers pre-run for pulling additional wire.

2025 Island Packet 439

Specifications

Media Gallery